DLINK CAMERA RECORDER DCS933L HOW TO
DLINK CAMERA RECORDER DCS933L PASSWORD
DLINK CAMERA RECORDER DCS933L MAC

ZoneMinder 1.24.2 (Haven't tried earlier versions) Remote Host Path: /video/mjpg.cgi (for mjpeg stream) Remote Method: Simple (using ZM 1.28.1 and latest FW, 'Regexp' seems to fix broken frames and 'Unable to decode' messages in log) Otherwise the image appears 'zoomed in.' This is a known firmware bug with the DCS-2230. A configuration known to produce 1920x1080 17fps is: Using MJPEG in resolutions other than 800x450 or 640x360 will cause large reduction in video frame rate on all the other profiles.

These cameras can transmit multiple streams ('profiles') simultaneously, but they do not produce their advertised frame rates with some combinations, particularly if using MJPEG in certain resolutions.

Remote Host Name: Host Path: /video1.mjpg (Change in video settings of the camera the mode to JPEG first) (Change in video settings of the camera the mode to MPEG4 first) Remote Host Path: /image/jpeg.cgi?profileid=1 Note: you must change Network -> ZM_HTTP_VERSION option to 1.0 for this camera to work! Where Profileid is setup in the camara's setup interface. Remote Host Path: /video/mjpg.cgi?profileid=3 The profile IDs are configurable under the 'Audio and Video' setup screen in the camera's built-in web server. Remote Host Name: Host Path: /video/mjpg.cgi?profileid=1įor 320x240 motion JPEG, substitute profileid=3. RTSP H.264 streaming works if set as follows: RTSP stream works with MPEG streams (/3gpp by default) Image capture works the same as 932L and /image/jpeg.cgi over HTTP.

DLINK CAMERA RECORDER DCS933L HOW TO

An unknown-quality H.264 stream available at Haven't worked out how to get it working in zoneminder yet.

You might also want to set the default (browser) view mode to image, so that you'll get something when logging into the camera if you don't have java installed. Here you can adjust settings for mjpeg quality and the frame rate. To set video properties on the camera, click on setup, then video. This camera can do up to 30 fps with MJPEG. I've noticed that the frame rate viewing the /video.cgi or /mjpeg.cgi feed directly in the browser is faster than what ZM records, however these cameras record at about 5fps, which is OK. Using /mjpeg.cgi gives a lot of erros in the log files:ĮRR If you want to limit the FPS just as it is set in the camera's setup -> video -> FPS, then you will need to use the video stream (video.cgi) and not the snapshot stream (/image/jpeg.cgi). Maintenance > Server Settings > Set Snapshot URL Authentication to 'Disabled'. The 'Snapshot URL Authentication' must be disabled on the camera.

Note that this is not needed in recent ZM (>1.29). There is the same aditional step as in DCS-900B, in the 'Options > Network' section of ZoneMinder.Īdditionally MJPEG stream avaliable at: /MJPEG.CGI but next step is required for it, in the 'Options > Network' section of ZoneMinder. With the latest versions of the DCS-900 'B' there is an additional step needed in the 'Options > Network' section of ZoneMinder. Remote Host Name: Host Port: 80 (Default) (/VIDEO.CGI is the MJpeg stream, and gets higher FPS in my testing) Remote Host Path: /VIDEO.CGI or /IMAGE.JPEG I have been able to get upto 8 fps with my revision 'B' camera. The 'B' version also works, but has a been reported to have lesser performance.

The 'A' version is reported to work extremely well with ZoneMinder. You should change those.There are 2 versions of this camera.

DLINK CAMERA RECORDER DCS933L PASSWORD

It will ask you for a username and password which are admin and admin. Enter that into your browser and it will bring you to D-Link’s network access page. Once you are on your router’s access page just look for the new item and grab the IP address.

DLINK CAMERA RECORDER DCS933L MAC

On my mac I go to to Network Settings > Advanced > TCP/IP, and it looks like this: You can find the IP address of your router on your computers settings. Once you are hooked up to an internet connection just go to your routers access page by typing the IP address of your router into your internet browser.

Simply plug your camera’s power cord into a normal wall outlet and ethernet port into a normal ethernet connection.Īccess your DCS-933L through your web browser: If your router does not support WPS then you will need to plug in via an ethernet connection. You now have sixty seconds to press the WPS button on your wireless router which will be located either somewhere on the router or on the router’s web access page. To establish a wireless connection plug in your camera and hold down the WPS button on the back of your camera the blue WPS status light will start blinking. Wireless is possible if your router supports WPS connections.

When you are connecting your camera to the internet you have two choices: wired or wireless. Enter your new FTP credentials into your DCS-933L.Access your DCS-933L through your web browser.Plug in your DCS-933L and connect it to the internet.

Dlink camera recorder dcs933l